powder coat rims Archives

The process of powder coating

September 25, 2017 by pcnearme

[et_pb_section fb_built=”1″ _builder_version=”3.22″][et_pb_row _builder_version=”3.25″][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text _builder_version=”3.29.3″ z_index_tablet=”500″]

How powder coating works

The basic process of powder coating is straightforward. Here’s a step-by-step guide to powder coating and protecting metal.

1.Blast It – Sandblasting is the best way to prep a metal surface in need of restoration. It removes dirt, grime, rust, corrosion. It also removes existing painted or powder coated finishes. All types of metal can be blasted such as alloys, aluminum, steel, iron, etc. Sometimes coaters will use a chemical strip process prior to abrasive blasting to keep the blast time down to a minimum. If you have a new metal project you can sometimes by-pass this step. Your powder coater will be able to make this determination. The point of blasting is to remove any mil-scale rust and rough up the surface prior to coating.

2.Prep It – Prepping consists of applying a metal prep chemical solution to neutralize surface impurities, cleaning off any lingering debris and prevent rust and corrosion. Depending on the type of metal there are several kinds of solutions your powder coater can use to enhance the surface before coating. If this is a concern for you make sure to ask your powder coater about what they will be using; this is a step that should not be missed.[/et_pb_text][et_pb_text admin_label=”MPW Blog Form Mobile” _builder_version=”3.29.3″ global_module=”12659″ saved_tabs=”all”]
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”3.29.3″][et_pb_column type=”1_2″ _builder_version=”3.29.3″][et_pb_text _builder_version=”3.29.3″][embedyt] https://www.youtube.com/watch?v=I2jSRY9roO8&width=1080&height=810&iv_load_policy=3&rel=0[/embedyt][/et_pb_text][/et_pb_column][et_pb_column type=”1_2″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”3.29.3″]

Click Thumbnail

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.29.3″][et_pb_column type=”4_4″ _builder_version=”3.29.3″][et_pb_text _builder_version=”3.29.3″]3.Powder It – When fully prepped and dry your metal project will be ready for powder coating. The coating itself is done through an electrolysis process, whereby, the metal object is positively charged in order for the powder to be attracted to it and bond well during the next stage. There are many colors and brands of powder to choose from depending on the needs of the customer and the end use of the project. There are outdoor rated and interior only rated colors and powders. Some powders require clear coats which could add to an increase in costs. Here’s more on powder types with this post. Be sure to ask your coater which is best for your project.

4.Cure It – The cure times for metal can range depending on how long it takes the oven to get to temp and the size of the oven. Typically degrees ranging from 250(low cure) to 400 are required for the powder to heat up enough to bond. Once the right temp is achieved it takes 15-30 minutes for your metal part to achieve this state. A coater’s oven should evenly displace the heat so that your part is heated throughout for the curing process to be done correctly. If you’re specifically looking for more info on powder coating rims click on here.[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.29.3″][et_pb_column type=”4_4″ _builder_version=”3.29.3″][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ saved_tabs=”all” global_module=”18725″]RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

Connect with us. Comment below. What would you like to know more about? I love to answer everyday questions to the consumer market wants to know about powder coating.

MAUIPOWDERWORKS.COM
Copyright 2016-2020©
[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

Can you powder coat over bondo?

July 19, 2017 by pcnearme

[et_pb_section fb_built=”1″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_row _builder_version=”4.16″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ custom_padding=”|||” global_colors_info=”{}” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.18.0″ z_index_tablet=”500″ global_colors_info=”{}”]

Filler applications can be tricky with powder coating.

It is not recommended to powder coat over Bondo or similar type putty products. Powder Coating over Bondo will cause outgassing to occur, this will create irregularities in the finish. Generally, any metal fabrication that has Bondo on it could be rejected by your custom coater. Generally, any metal fabrication that has Bondo on it should be disclosed. It could be rejected by your custom coater. If a filler is needed and there are no other options, then we recommend a high temp filler such as Alvin’s Lab Metal.

[/et_pb_text][et_pb_text admin_label=”MPW Guide form mobile” _builder_version=”4.14.7″ global_module=”12668″ saved_tabs=”all” global_colors_info=”{}”]
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_4,1_2,1_4″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_column type=”1_4″ _builder_version=”4.16″ global_colors_info=”{}”][/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_code _builder_version=”4.18.0″ _module_preset=”default” hover_enabled=”0″ global_colors_info=”{}” sticky_enabled=”0″][/et_pb_code][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”4.16″ global_colors_info=”{}”][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.16″ global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_text admin_label=”2022 blog wrap up” _builder_version=”4.17.3″ global_module=”18725″ saved_tabs=”all” global_colors_info=”{}”]

About us

RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers & powder coaters can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

Connect with us. Comment below. What would you like to know more about? I love to answer everyday questions to the consumer market wants to know about powder coating.

MAUIPOWDERWORKS.COM
Copyright 2016-2022©
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_column type=”1_2″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_text _builder_version=”4.16″ global_colors_info=”{}”]

Learn more about the powder coating process.

[/et_pb_text][/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.16″ global_colors_info=”{}”][et_pb_text _builder_version=”4.16″ global_colors_info=”{}”]

Find out how much it will cost to get your rims powder coated.

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]

THE BEST WAY TO DEGREASE RIMS BEFORE POWDER COATING

July 19, 2017 by pcnearme

[et_pb_section fb_built=”1″ _builder_version=”3.22″][et_pb_row _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.5.1″ hover_enabled=”0″ z_index_tablet=”500″]

How to de-grease your rims or metal wheel project before powder coating

It’s essential to prep metal rims or wheel project before powder coating. Removal of excess grease and dirt is not always expected but is a courtesy to your local custom coater. Failure to meet minimum prep may give the powder coater reason to charge you extra. Be wary of harsh solvents like acetone, thinners and chemical strippers. They can be too much for existing painted finishes and really messy to handle. We recommend Castrol Super Clean. It is premier product but any detergent based cleaners like simple green will do fine with a little more scrubbing.
[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”3_5,2_5″ _builder_version=”3.29.3″][et_pb_column type=”3_5″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”4.5.1″ hover_enabled=”0″]Here’s how to de-grease your rims

Green scratch pad or greenie about 5-6″ wide(gloves are optional)
De-greaser or cleaner of your choice
Bucket of water or access to a hose or sink
Squirt your faviorte product and let sit for 3-5 min.
Rinse, repeat if neccesary until clean

Get the full guides to getting your rims powder coated.[/et_pb_text][/et_pb_column][et_pb_column type=”2_5″ _builder_version=”3.29.3″][et_pb_image src=”https://www.powdercoatingnearme.com/wp-content/uploads/2018/05/Castrol-Super-Clean.jpg” alt=”castrol super clean” _builder_version=”4.5.1″ hover_enabled=”0″ box_shadow_style=”preset1″ box_shadow_color=”#474747″][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.4.7″][et_pb_column type=”4_4″ _builder_version=”4.4.7″][et_pb_text _builder_version=”4.5.1″ hover_enabled=”0″]

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.29.3″][et_pb_column type=”4_4″ _builder_version=”3.29.3″][et_pb_text admin_label=”MPW Guide form mobile” _builder_version=”4.0.9″ global_module=”12668″ saved_tabs=”all”]
[/et_pb_text][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ saved_tabs=”all” global_module=”18725″]RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

What do I need to do to prep my rims before getting them powder coated?

July 19, 2017 by pcnearme

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row admin_label=”row” _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”Text” _builder_version=”4.4.7″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”]

Powder coating your rims is a great way to update a truck, car or motorcycle.

Generally, custom coaters can offer services dismount and pre-prep services like de-greasing but it is always good to ask beforehand.

Some will either charge separately or include it in there pricing.

If your coater doesn’t provide these services you will need to do the following prep before bringing your project in.

Dismount the tires from all rims. DIY-ers usually have the know-how to do this but you can always drop by your local tire shop to get them dismounted. If you go this route, consider timing it with the replacement of your tires to save money on dismounting.
All TPMS sensors and weights need to be removed.
Remove the stems.
If bearings are present they will have to be removed.
Remove any excess grease and dirt; bring in a clean condition.

[/et_pb_text][et_pb_text admin_label=”MPW Guide form mobile” _builder_version=”4.0.9″ global_module=”12668″ saved_tabs=”all”]
[/et_pb_text][et_pb_text _builder_version=”4.4.7″]Check out more tips on the best type of products to use to de-grease before powder coating.[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_3,2_3″ _builder_version=”3.29.3″][et_pb_column type=”1_3″ _builder_version=”3.29.3″][et_pb_divider show_divider=”off” admin_label=”Divider” _builder_version=”3.29.3″][/et_pb_divider][et_pb_text _builder_version=”4.5.1″ hover_enabled=”0″]

Rim Prep 101

[/et_pb_text][/et_pb_column][et_pb_column type=”2_3″ _builder_version=”3.29.3″][et_pb_text _builder_version=”3.29.3″][embedyt] https://www.youtube.com/watch?v=tiLALB3qZh0&width=1080&height=810&iv_load_policy=3&rel=0[/embedyt][/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.29.3″][et_pb_column type=”4_4″ _builder_version=”3.29.3″][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ hover_enabled=”0″ saved_tabs=”all” global_module=”18725″]Maui Powder Works is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to our blog below.

Did you know Maui Powder Works is considered a GREEN business?

February 17, 2017 by pcnearme

[et_pb_section fb_built=”1″ admin_label=”section” _builder_version=”3.22″][et_pb_row column_structure=”3_5,2_5″ _builder_version=”3.26″][et_pb_column type=”3_5″ _builder_version=”3.26″][et_pb_text _builder_version=”4.5.1″]

Green Coatings from Powder Coating Hawaii

Unlike traditional painting contractors who deal with liquid paints and epoxies, the powder industry spares Hawaii landfills from excessive debris and waste from job clean up. Better yet, powder coatings contain no solvents and therefore do not emit pollution in the form of harmful fumes and gases known as VOCs into the atmosphere.

[/et_pb_text][/et_pb_column][et_pb_column type=”2_5″ _builder_version=”3.26″][et_pb_image src=”https://www.powdercoatingnearme.com/wp-content/uploads/2016/07/grapes.jpg” align=”center” _builder_version=”3.26.1″][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row admin_label=”row” _builder_version=”3.26″ background_size=”initial” background_position=”top_left” background_repeat=”repeat” collapsed=”off”][et_pb_column type=”4_4″ _builder_version=”3.26″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text _builder_version=”4.5.1″ _module_preset=”default”]

Once you learn about powder coating you’ll soon realize how many everyday things are powder coated which leads you to look around a room and ask yourself, “Can I powder coat this?”

[/et_pb_text][et_pb_text _builder_version=”4.5.1″ _module_preset=”default”]Aside from offering a safe superior finish to metal, you can be confident you’re not hurting the planet. With the greatest efficiency and the highest quality powder coating meets stringent air pollution legislation. The next time you are faced with coating your metal project think powder coating first; think Maui Powder Works! [/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_2,1_2″ _builder_version=”4.5.1″ _module_preset=”default”][et_pb_column type=”1_2″ _builder_version=”4.5.1″ _module_preset=”default”][et_pb_image src=”https://www.powdercoatingnearme.com/wp-content/uploads/2017/02/About-us-MPW.png” alt=”Rosskote, architects, Auto, automobiles, brand, care and maintenance, cleaning, coatings, small business, contracting, cure, powder, curing powder, custom, custom coaters, customer service, design, designers, DIY, exterior finish, hawaii business, home garage, hospitality, hotel, interior finish, Life hacks, manufacturing, metal coatings, metal prep, metal project, metal, restoration, military, motorcycles, performance finishes, powder coating, powder coating hawaii, powder coat timing, powder coat ovens, powder colors, prepping metal, process, Restoration, Rims, sandblasting, shortcuts, specializing, steps to powder coating, troubleshooting powder coating, what we stand for, Wheels, My Mantra, Ross Scott, Maui Powder Works, Hawaii Business, News, Powder Coating, Sandblasting, Hawaiian Islands, Maui, about us, about maui powder works, powder coating near me, powder coating hawaii, powder coating oahu, powder coating kauai, powder coating big island, free pdfs, pdf, free downloads, downloads, powder coating FAQs, hawaii powder coating wheel options, tesla motor club, tesla, how to powder coat rims, powder coat rims hawaii, powder coat rim, powder coat rims, powder coating rims, powder coating rim, powder coated rims, powder coated rim, FAQs, top ten, top 10, top 10 powder coating facts, powder coating facts, rim prep 101, rim prep, anodized aluminum, substrate, steel, stainless, stainless steel, galvanized, galvanized steel, alloy, brass, Powder applications, powder coat colors, powder coat types, powder colors, powder types, metal coatings, Matte, Satin, Super Mirror, Anodized, Metallic, Shimmer, Illusions, Candy, Translucent, Textures, Veins, Fluorescent, Industrial RAL, Standard, Dormant, Hammertone, Stone, cure times, rim prep 101, rim prep, prepping rims, 4 step process, columbia coatings, prismatic, prismatic powders, tiger shield, tiger drylac” title_text=”About MPW” url=”https://mauipowderworks.com/links/” _builder_version=”4.5.1″ _module_preset=”default”][/et_pb_image][/et_pb_column][et_pb_column type=”1_2″ _builder_version=”4.5.1″ _module_preset=”default”][et_pb_image src=”https://mauipowderworks.com/wp-content/uploads/2018/06/Our-Clients-1.0.png” alt=”Our clients, Rosskote, architects, Auto, automobiles, brand, care and maintenance, cleaning, coatings, small business, contracting, cure, powder, curing powder, custom, custom coaters, customer service, design, designers, DIY, exterior finish, hawaii business, home garage, hospitality, hotel, interior finish, Life hacks, manufacturing, metal coatings, metal prep, metal project, metal, restoration, military, motorcycles, performance finishes, powder coating, powder coating hawaii, powder coat timing, powder coat ovens, powder colors, prepping metal, process, Restoration, Rims, sandblasting, shortcuts, specializing, steps to powder coating, troubleshooting powder coating, what we stand for, Wheels, My Mantra, Ross Scott, Maui Powder Works, Hawaii Business, News, Powder Coating, Sandblasting, Hawaiian Islands, Maui, about us, about maui powder works, powder coating near me, powder coating hawaii, powder coating oahu, powder coating kauai, powder coating big island, free pdfs, pdf, free downloads, downloads, powder coating FAQs, hawaii powder coating wheel options, tesla motor club, tesla, how to powder coat rims, powder coat rims hawaii, powder coat rim, powder coat rims, powder coating rims, powder coating rim, powder coated rims, powder coated rim, FAQs, top ten, top 10, top 10 powder coating facts, powder coating facts, rim prep 101, rim prep, anodized aluminum, substrate, steel, stainless, stainless steel, galvanized, galvanized steel, alloy, brass, Powder applications, powder coat colors, powder coat types, powder colors, powder types, metal coatings, Matte, Satin, Super Mirror, Anodized, Metallic, Shimmer, Illusions, Candy, Translucent, Textures, Veins, Fluorescent, Industrial RAL, Standard, Dormant, Hammertone, Stone, cure times, rim prep 101, rim prep, prepping rims, 4 step process, columbia coatings, prismatic, prismatic powders, tiger shield, tiger drylac” title_text=”Our Clients 1.0″ url=”https://mauipowderworks.com/testimonials/” _builder_version=”4.5.1″ _module_preset=”default”][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”4.5.1″ _module_preset=”default”][et_pb_column type=”4_4″ _builder_version=”4.5.1″ _module_preset=”default”][et_pb_text _builder_version=”4.5.1″]

Once you learn about powder coating you’ll soon realize how many everyday things are powder coated which leads you to look around a room and ask yourself, “Can I powder coat this?” #powdercoating #customcoater #powdercoated #architectural #painting https://t.co/OYrY4zKChJ pic.twitter.com/eI4G6dZr1U

— Maui Powder Works (@MauiPowderWorks) July 12, 2019

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row admin_label=”row” _builder_version=”3.26″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.26″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ global_module=”18725″ saved_tabs=”all”]RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast

There are different types and kinds of powder coat colors

January 13, 2017 by pcnearme

Learn the powder coating powder color basics.

There are different types and kinds of powder coat colors. But which one is best for your needs? Heres a brief list.

Scroll down to watch the video playlist.

Matte, Satin & Super Mirror
Anodized & Metallic
Shimmer & Illusions
Candy & Translucent
Textures & Veins
Fluorescent
Industrial RAL
Standard & Dormant
Hammertone & Stone

Powder for metal coatings comes in many different colors, textures, and looks. They are essentially liquid coating in a powdered form. Powders are made from mostly polyester and urethanes which give them their durability and UV resistance from fading, however, there are epoxies and hybrids as well. Most are just a single-stage application. Some are two-stage or colors that require a clear coat.

Depending on the condition of your project it’s important to know which powder will work best for you. Watch this video playlist to learn it all in just a few minutes!

[embedyt] https://www.youtube.com/embed?listType=playlist&list=PL5VhoP4pNEX8dtOC2M-RliwNvTVO4vXjH&v=wsGUKhSGkbw[/embedyt]

Your custom coater should have samples for you to choose from or head on over to our colors page to see links to real projects we’ve done. You can view what other customers have done with their projects in the gallery.

Stumped? See what the latest rim trends in powder coating are in this post.[/et_pb_text][et_pb_text _builder_version=”3.29.3″]

Free Downloads

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row column_structure=”1_4,1_4,1_4,1_4″ _builder_version=”3.29.3″][et_pb_column type=”1_4″ _builder_version=”3.29.3″][et_pb_image src=”https://www.powdercoatingnearme.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-1.png” url=”https://www.powdercoatingnearme.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-1.pdf” admin_label=”PC1″ _builder_version=”3.29.3″][/et_pb_image][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”3.29.3″][et_pb_image src=”https://mauipowderworks.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-2.png” url=”https://mauipowderworks.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-2.pdf” admin_label=”PC2″ _builder_version=”3.29.3″][/et_pb_image][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”3.29.3″][et_pb_image src=”https://mauipowderworks.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-3.png” url=”https://mauipowderworks.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-3.pdf” admin_label=”PC3″ _builder_version=”3.29.3″][/et_pb_image][/et_pb_column][et_pb_column type=”1_4″ _builder_version=”3.29.3″][et_pb_image src=”https://mauipowderworks.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-4.png” url=”https://mauipowderworks.com/wp-content/uploads/2018/02/Types-and-kinds-of-powders-part-4.pdf” admin_label=”PC4″ _builder_version=”3.29.3″][/et_pb_image][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.25″ background_size=”initial” background_position=”top_left” background_repeat=”repeat”][et_pb_column type=”4_4″ _builder_version=”3.25″ custom_padding=”|||” custom_padding__hover=”|||”][et_pb_text admin_label=”2020 blog wrap up” _builder_version=”4.5.1″ hover_enabled=”0″ saved_tabs=”all” global_module=”18725″]RossKote is committed to sharing their experience in metal coatings, painting, and restoration so customers can navigate the process of powder coating and make the best choices for getting their projects done.

RossKote regularly contributes helpful videos on his blog and YouTube channel.

Join us. As we build a powder coating community online to share our passion for performance finishes by subscribing to RossKote’s Powder Coater Podcast